edge flange

Summary: Robert Clementi is having difficulties modeling a sheet metal part, which is not forming as expected. Specifically, there's an unwanted step, preventing the edge bend from aligning correctly with the opening. Paul Hillman suggests that the issue might be related to the relief type settings and recommends using a "tear" relief type. The group is noted to be intended for discussing Solidworks Manage, not the modeling software being used by Robert Clementi.

AI Summary

i am trying to model stuff from too tall toby as well as a other.

but this sheet metal part isnt coming out right there is some setting that i messed up some where

and really cant figure it out. the edge bend should be right up againsy opening but there is a step i dont want

1 comment

Paul Hillman

2 weeks, 6 days ago

Hello Robert. This group is for Soildworks Manage, which is different from Solidwork’s Modeling software. That said, I would look at your relief type. I suspect you want “tear”.